Tile Adhesive · Type 2
BCM 03
Vitrified tiles for wall and floor
BCM 03 is presented as a polymer-based Type 2 adhesive intended for vitrified tile installation.
PRODUCT TECHNICAL PROFILE
Specifications & selection information
Product identity and packaging information are based on supplied imagery. Numerical performance values must be confirmed from the current signed technical data sheet (TDS); none are invented here.
| Product category | Type 2 |
|---|---|
| Pack presentation | 20 kg bag (shown on supplied packaging) |
| Product system | Polymer-based tile adhesive |
| Intended application | Prepared walls and floors |
| Tile / substrate guidance | Vitrified tiles; verify format limits |
| Mixing ratio | Refer to current TDS |
| Pot life / open time | Refer to current TDS |
| Coverage / consumption | Depends on substrate, tile and application; request TDS |
| Joint width / cure time | Refer to current TDS where applicable |
| Test values / certification scope | Request current verified test reports and approvals |
WHERE TO USE
Designed around the installation
Vitrified tile installations on approved wall and floor substrates
Before you start
Confirm tile dimensions, substrate condition and current product instructions.
- Inspect substrate condition, soundness and cleanliness.
- Confirm product compatibility with tile type, dimensions and exposure.
- Follow the latest BCM mixing, application and curing instructions.
- Check required coverage, movement joints and site conditions.
PROJECT APPLICATIONS
See the installation context
Residential floors & wallsExplore application ↗
Commercial & high-traffic floorsExplore application ↗
Bathrooms & wet areasExplore application ↗Application images are illustrative; they are not documented BCM project installations.
INSTALLER SUPPORT
Get the right product documents.
Request current technical data, safety information, application guidance and supporting test documents before specification or installation.
COMPLETE THE SYSTEM
BCM 01
BCM 06
BCM 09
BCM SuperMaxx Titanium